BL62X B58 Gen 1 6-Port Hybrid Turbo
The BL62X is a stock-location hybrid turbocharger for first-generation BMW B58 engines (B58B30M0) with the 6-port turbine housing. It is rated at 800HP and built for street and mild track cars that have taken the factory turbo as far as it will go and want a real power step without moving to a big-single kit. The OEM Gen 1 6-port turbine housing and electronic wastegate are retained, so there is no custom manifold, no relocated downpipe flange, and no new oil or coolant lines.
Specifications
- Application: BMW B58 Gen 1 / B58B30M0 / 6-port
- Fitment type: direct-fit, stock location
- Power goal: 800HP
- Compressor inducer: 62 mm
- Turbine exducer: 62 mm
- Housing: OEM-style Gen 1 6-port turbine housing
- Wastegate: factory electronic wastegate, transfer OE actuator
- Oil and water: factory lines and fittings
- Supported power: typically 600-750+ whp with fuel, exhaust, and tune (results vary)
- Core: no OEM core required on new units
Against the stock ~51 mm compressor, the 62 mm wheel moves considerably more air while spool stays close to factory. Power arrives earlier than a 67 mm+ hybrid and holds farther than stock.
Fitment
| Chassis | Model |
|---|---|
| F20 / F21 | M140i |
| F22 / F23 | M240i |
| F30 / F31 / F34 | 340i |
| F32 / F33 / F36 | 440i |
| G30 / G31 | 540i |
| G32 | 640i |
| G11 / G12 | 740i |
| G01 (early) | X3 M40i with Gen 1 B58 |
| G02 (early) | X4 M40i with Gen 1 B58 |
It does not fit B58 Gen 2 (6-port or 2-port) or B48/B46 engines, so confirm engine code B58B30M0 before ordering. A custom tune is required, and fueling, charge pipe, and downpipe should be planned around the power target.
Why Boost Lab
Every BL62X is assembled, balanced, and tested in house in Dade City, Florida, and backed by a warranty on our work.
