Top Feed Complete Fuel Injector Cleaning and Flow Testing
Injector bodies are cleaned, visual inspected, and numbered.
Injector coils are now tested for resistance, shorts, and current draw.
Perform leak test, spray pattern, and flow rate testing on our ASNU flow bench. Record the results.
Remove filter baskets, o-rings, and pintle caps. Bead-blast any loose paint and rust from the metal injector body.
The injectors are placed in our first ultrasonic cleaning tank to remove and any particles, dirt, etc for 5-10 minutes.
Into a second ultrasonic tank they go, they are now cycled on and off allowing the ultrasonic energy to dislodge any particles and build-up inside the injectors for 15-20 minutes.
A high pressure back-flush is done to remove any particles inside.
Install new filter baskets, o-rings, and pintle caps. (as required)
Back to the flow bench for retesting of spray pattern, flow rate, and leak checking. This test data is also recorded
Prepare a comprehensive test report with before and after test data. The injectors are then packed to be returned.
*Injectors must be shipped or dropped off at our Tampa, FL facility at 8602 Temple Terrace Hwy, Suite C-44, Tampa, FL 33637. Return Shipping will be included upon checkout.
?**PRICE IS PER INJECTOR. ADJUST QUANTITY TO AMOUNT OF INJECTORS.
